Change your Region and Language here. Wiring diagrams for Engine products using the search bar beEnter your email address and check your inbox. Please check your email for further instructions. To protect items locked in the glove box when using valet parking, leave the sub key with the attendant. Since the side doors can be locked without a key, you should always carry a spare key in case you accidentally lock your keys inside the vehicle. Your vehicle is supplied with the two kinds of keys. Your Toyota dealer will need one of them to make a new key with a builtin transponder chip. A transponder chip for engine immobilizer system has been placed in the head of the master and sub keys. These chips are needed to enable the system to function correctly, so be careful not to lose these keys. When starting the engine, do not use the key with a key ring resting on the key grip and do not press the key ring against the key grip. Otherwise the engine may not start, or may stop soon after it starts. Do not cover the key grip with any material that cuts off electromagnetic waves. Do not knock the key hard against other objects. Do not leave the key exposed to high temperatures for a long period, such as on the dashboard and hood under direct sunlight. Do not put the key in water or wash it in an ultrasonic washer. Your key number is shown on the plate. Keep the plate in a safe place such as your wallet, not in the vehicle. If you should lose your keys or if you need additional keys, duplicates can be made by a Toyota dealer using the key number. The engine immobilizer system is a theft prevention system. The engine will start only when the electronic code in the chip corresponds to the registered ID code for the vehicle. The system is automatically set when the key is removed from the ignition switch. The indicator light will start flashing to show the system is set. If any of the following indicator conditions occurs, contact your Toyota dealer. The indicator light stays on except when the theft deterrent system is setting or activating. The indicator light does not start flashing when the key is removed from the ignition switch. Inserting the registered key in the ignition switch automatically cancels the system, which enables the engine to start. The indicator light will go off. For your Toyota dealer to make you a new key with builtin transponder chip, your dealer will need your key number and master key. However, there is a limit to the number of additional keys your Toyota dealer can make for you. Do not modify, remove or disassemble the engine immobilizer system. If any unauthorized changes or modifications are made, proper operation of the system cannot be guaranteed. This device complies with Part 15 of the FCC Rules. This device complies with RSS210 of Industry Canada. Insert the key into the keyhole and turn it. This double key turning operation to unlock all the side doors and back door can be changed to a single key turning operation. Do not pull the inside handle of the front doors while driving. The doors will open and an accident may occur. Toyota strongly recommends that all children be placed in the rear seat of the vehicle. Closing the door with the lock knob in the lock position will also lock the door. Be careful not to lock your keys in the vehicle. The front doors cannot be locked if you leave the key in the ignition switch. Push the switch down on the front side. Push the switch down on the rear side. Operating the switch simultaneously locks or unlocks
© 2025 Created by Andres Gonzalez.
Powered by
You need to be a member of RhinoFabStudio to add comments!
Join RhinoFabStudio