Rhino to Formaris / Lectra

Replies to This Discussion

Permalink Reply by Carlos Pérez on September 8, 2010 at 5:36am

FYI- Steve Howden was very kind to answer this on the Rhino newsgroup. Just in case anyone is interested:

> Hi carlos,
>
> AAMA is just DXF with a few conventions for layering. The layer list below
> is what we use and I 'believe' that is the standard.
>
> So in Rhino name your layers as below ie. "1" for CUT, "13" for Drill etc
> and it should all read in fine
>
> 1 CUT, OUTLINE
> 2 Turn or Grade points
> 3 CURVE POINTS
> 4 NOTCH
> 6 MIRROR LINES
> 8 DRAW, INK
> 11 INTCUT
> 13 DRILL
> 14 SEW LINES
> 15 QUALITY LINES
> 19 TEXT
> 26 REF
>
> HTH, Steve
>
> --
> Steve Howden
> 3Dinflate
> Tiger Angel Pty Ltd
> www.3dinflate.com.au
> www.tigerangel.com.au
> steve@NOSPAM.3dinflate.com.au

• ▶ Reply