Arearae pro manual

The AreaRAE Rapid Deployment Kit (RDK) includes four versatile GPS-enabled AreaRAE monitors, RAEMet (AreaRAE Pro RDK only), a RAELink3 wireless router built in and all the necessary accessories for field operation. With The RDK, you have everything you need to create a perimeter and set up a command station up to two miles from the site. Please note: Other configurations are available. For pricing, please call AFC International at 1-800-952-3293, 219-987-6825 or fax 219-987-6826 or email sales@afcintl.com. Description. Catalog No. AreaRae Pro Gas Detector, ISM 900 MHz, Mesh, PID ppb, LEL, O 2, CO, H 2 S sensors, RAEMet sensor. W01A-110101-056079-01. Carefully place the cap back onto the AreaRAE Plus/Pro and tighten the screw. 80 fAreaRAE Plus & AreaRAE Pro User's Guide 17.4.2 Cleaning Or Replacing The 7R+ PID Note: Always calibrate the AreaRAE Plus/Pro after replacing the sensor module. 1. Gently lift out the PID module from the instrument with your fingers. 2. AreaRAE STEEL PGM-5520 (Europe) WIRELESS MULTI-GAS MONITOR Operation & Maintenance Manual Document Number: 029-4034-00E Revision A, January 2006. i - READ BEFORE OPERATING - This manual must be carefully read byALL individuals who have or will have theresponsibility for using, maintaining, or servicing this product. The product will perform as This manual must be carefully read by all individuals who have or will have the responsibility of using, maintaining, or servicing this product. The product will perform as designed only if it is used, maintained, and serviced in accordance with the manufacturer's instructions. CAUTION! Never operate the monitor when the cover is removed. The correct procedure to calibrate an AREARAE monitor can be find on the manual, page 4-7. The AREARAE manual can be find attached the article. JJS Technical Services 1900 East Golf Rd., Suite 950 Schaumburg, IL 60173 1-866-4 JJSTECH (1-866-455-7832) sales@jjstech.com The AreaRAE Pro/AreaRAE Plus has the ability to have 3 wireless radios but only 1 connects to the Host modem which is the ISM radio. This radio must be turned on with the correct Network ID. The Manual for the AreaRAE Pro and AreaRAE Plus is found here with the menu options for Programming Network ID is in 12.3.7. For years, you've relied on AreaRAE as a first line of defense. As the threats have evolved, our technology has, too. Today's AreaRAE Pro wireless multi-gas, multi-threat detector is equipped with more sensors, more versatility, and more insight into threats happening in real-time—arming you with the information you need when seconds count.. KEY FEATURES: AreaRAE Plus & AreaRAE Pro User's Guide GPS enabled and power is off (flashing) Cannot find satellite 1 to 3 satellites 4 to 8 satellites 9 to 12 satellites Pump operating normally (alternates between these two icons) Pump blocked (blinks once per second) Datalogging status (shown when datalogging is on, blank when off) Battery voltage is ≥80% AreaRAE Pro & AreaRAEPlus QuickStart Guide Honeywell RAE Systems1349 Moffett Park Dr.Sunnyvale, CA 94089 USA BCraesystems.com คำเตือน อ่านก่อนใช้งาน คู่มือผู้ใช้ AreaRAE Pro/Plus ต้องอ่านอย่างละเอียดโดยบุคคลทุกคนที่มีหรือจะต้อง Enabling AreaRAE instrument monitoring 1. Use this setup if you have AreaRAE instruments connected directly to this PC through a modem. 2. Make sure your instruments are on and operating . 3. Connect a suitable modem to an available serial port and turn it on. Make sure it's working. 4. lick on "Data Source" toolbar icon.