Angle globe valve pdf file

Angle pattern with flanges • TRB 801 Annex II No. 45 (except EN-JL1040) • EN ISO 15848-1 / TA - Luft (optional) TÜV-Test-No. TA 08 2016 C04 Grey cast iron SG iron Fig. 007/307 Page 9 ARI-STOBU® - Angle pattern with flanges • TRB 801 Annex II No. 45 • EN ISO 15848-1 / TA - Luft (optional) TÜV-Test-No. TA 08 2016 C04 Cast steel Y-Globe Stop, Check and Stop Check Valves. Y-pattern globe valves provide the maximum Cv possible in a globe valve. All Y-pattern valves are rodable. Available in 1/2″ to 4″; ASME pressure classes through 4500; SA105, F22, F91, F316, F347, Inconel™, Monel™ and other materials. T-Pattern Stop, Check and Stop Check Valves. Fig. B: Angle globe valve with screwed ends Fig. C: A typical large globe valve with flanged ends satisf actory service. Valves subjected to high-dif f erential pressure-throttling service require specially designed valve trim.Generally the maximum dif f erential pressure across the valve disc should not exceed 20 percent of the maximum upstream pressure or 200 psi (1380 kPa), whichever is less. 16550 West Stratton Drive New Berlin, Wisconsin, 53151 Ph.: 262-432-2700 Fax: 262-432-2701. 1075 Water Street Prairie Du Sac, Wisconsin, 53578 Ph.: 608-643-8565 Details Hayward Angle Globe Valves are used in tight spaces where a 90° change in flow direction is needed and there is insufficient room for extra fittings. Since they are globe valves, they are ideal for sampling and throttling applications. All Angle Globe Valves are assembled with silicone free lubricant and have an FPM o-ring seal and seat. As the flow is regulated, the angle valve reduces cavitation, vibration, corrosion, and noise. When. the valve is engaged, the fluid or gas flows at a right angle toward the direction it enters the valve. Engaging the valve can isolate flow to provide additional control for the machinery's overall. functioning and operation. High Flow Globe & Angle Valves For Your Local Marshall Excelsior Distributor Call 269-789-6700, Fax 269-781-8340 or E-mail: sales@marshallexcelsior.com marshallexcelsior.com. Title: Marshall Excelsior Company - Product Catalog 134484.indd Author: jhampton Created Date: the flow through the No.7 valve.In the larger valves and for the higher pressures, the "pull"of the water in passing through the valve seat may cause the valve to close suddenly from a nearly closed position.For this reason, this valve is not made in sizes above 2 inches. In the No.77 valve, made in sizes 2 inches and larger, the inlet pressure AV Series Angle Globe Valves 1/4" TO 2" PVC sizE maTEriaL End COnnECTiOn sEaLs PrEssurE raTinG 1/4" - 2" (DN8 - DN50) PVC Threaded or Flanged FPM 150 PSI @ 70°F Non-Shock sELECTiOn CHarT. 60 80 100 120 140 160 180 200 220 240 260 WORKING PRESSURE (PSI) TEMPERATURE ºF 160 140 120 100 80 60 40 20 0 Gray Iron Globe & Angle Valves Flanged & Threaded Ends ASME B16.10 Face-to-Face and End-to-End Dimensions of Valves PERFORMANCE RATING: Saturated Steam: 250 psi (17.2 Bar) to 406°F (207°C) Cold Working Pressure: 500 psi (34.5 Bar) at 100° F Temperature Range: -20°F to 406°F MATERIALS: Body, Bonnet & Disc: ASTM A126 CL-B, CI Globe valve A globe valve, different from ball valve, is a type of valve used for regulating flow in a pipeline, consisting of a movable plug or disc element and a stationary ring seat in a generally spherical body. [1] Globe valves are named for their spherical body shape with the two halves of the body being separated by an internal baffle. Our OpGL™ Globe Contro